Zündapp frame plate – engraved manufacturer plate

Zündapp frame plate (engraved)

We make your Zündapp identification plate to match the original layout: an engraved frame plate with your bike’s data for a clean restoration finish.

This manufacturer plate (also used as a serial number plate, and sometimes referred to as a mines plate in the French context) can help for restorations, registration files, and inspection requirements.

What we engrave (examples)

• Type (model/type code)
• List (list code)
• Year
• Permissible total weight
• Frame No.

Standard drilling

For drilling, hole centers are always 5 mm (≈ 0.20 in) from the edges. With 2 horizontal holes: pitch = width − 10 mm (≈ width − 0.39 in). With 2 vertical holes: pitch = height − 10 mm (≈ height − 0.39 in). With 4 corner holes: horizontal pitch = width − 10 mm (≈ width − 0.39 in) and vertical pitch = height − 10 mm (≈ height − 0.39 in).

Covered models (examples)

Depending on year and version, Zündapp produced many families of mopeds and motorcycles. Common examples include KS 50, GTS 50, CS 50, KS 80, C50 Sport, Combinette, Falconette…

Type and List codes vary with versions (for example 517 / 529 series, list codes A, F, G, H…). Enter your data in the customization fields — the Type field stays open because several codes can exist.

Information to provide

• If possible: plate width/height and hole positions.
• Your data: Type, List, Year, Frame No., permissible total weight, etc.